WHITE NITRILE RUBBER

White Nitrile sheet made to FDA requirements for food, pharmaceutical, cosmetic and other applications. Non-marking, non-toxic and non-allergenic formulation. Good oil and animal fat resistance . Made with FDA-approved ingredients.

GRADEIndustrial
FINISHSmooth
TRIMMEDYes
COLORWhite

FEATURES

TECHNICAL DATA

  • Superior resistance to petroleum-based hydraulic fluids
  • Wide range of service temperatures
  • Good resistance to hydrocarbon solvents
  • Very Good resistance to alkalis and acids
  • The appropriate solution where moderate oil or gas resistance is required

WHITE NITRILE RUBBER

Product Specs

Thickness (Inches)Width (Inches)Lineal Feet per Roll (Feet)ColorLbs/RollDurometer
1-1/2850Black30060
1-1/21050Black37560
1-1/21250Black49160
*Cut lengths available
ASTMDESCRIPTIONVALUE
SPECIFIC GRAVITY (gr/cc)1.4
D2240HARDNESS (SHORE A)60
D412TENSILE (psi)
ULTIMATE ELONGATION (%)
1000 min.
300 min.
D395BHEAT AGING70 hrs @ 100° C Changed
Hardness: +/- 15 points max.
Tensile: +/- 30% max.
Elongation: -50% max.
D471OIL AGING (#3)70 hrs @ 100° C
Changed Volume: 60% max.
TEMPERATURE RANGE(general guideline)-40° to 200° F
-40° to 93° C
Width tolerance: -0 / + 1’’
Material is within Commercial Sheet Rubber Tolerances.
Meets the requirements for FDA 21 CFR 177.26000 and 182.8991
FDA 21 CFR 177.2600: «Rubber articles intended for repeated use may be safely used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section.»